This is a three button remote flip key for the Toyota MR2 used from 1999 to 2005.
It is complete with the following:
- Remote two button case
- Remote two button circuit board - 433.92 MHz for the UK and Europe
- Lithium battery CR2032 3V
- Uncut key blade
- Transponder chip - located within the remote case
The key can be cut if required.
The key code will take one of the following formats:
- A letter D followed by a four digit number in the range 0001 to 3000.
- A letter G followed by a four digit number in the range 0001 to 2377.
- A letter P followed by a four digit number in the range 0001 to 2390.
- A letter X followed by a four digit number in the range 0001 to 2248.
The key code is recorded on a metal tag like this:
This tag would have been attached to the keys when the car was new.
The key can be cut from the key code or a decent digital picture of an existing key for the vehicle.
A picture like this taken from the top:
If the key is cut from pictures the key code will be provided. If you ever require another key then one can be cut from this key code.
If you have a question about this item then please send a message to: enquiries@keymoon.uk
